IP Camera Configuration: 3 Easy Steps

IP Camera Configuration: 3 Easy Steps

If you are interested in monitoring the activity around your home or business, then you will be happy to know that there are certain types of technology that can be extremely useful to you. This is especially the case when it comes to IP cameras.

IP cameras, also known as Internet protocol surveillance cameras, are digital video cameras that can be used for surveillance and send and receive information through networks and over the Internet. Sure, you could use a webcam to do this, but they are not typically linked to other monitors and cameras.

IP surveillance camera systems are like closed circuit television. They give you more flexibility and control.

The good news is that these cameras are extremely to set up. You simply connect them directly to your Ethernet or wireless router. Let’s take a moment to go over how IP camera configuration works and the steps you need to take in order to get set up.

Step 1: Test Locations and Site Your Camera

Fix your camera to a stable surface, screwing it into position if possible. As a word of caution, you should always remember to be careful when choosing the positioning of your camera. It’s important that you respect the privacy of people around, specifically in residential areas.

In fact, cameras that are being used in personal and domestic capacities are not covered under the Data Protection Act. So research the rules and exceptions.

Step 2: Sign In To A DNS

If you don’t have broadband, then you probably don’t have a fixed IP address. This means that the address at which your router may be found online will often change now and then.

And that can make it impossible for you to access your webcam because your information and details are always changing.

Dynamic DNS services, keep a database of changing IP addresses. They will assign you subdomains that will forward to your broadband connection which will allow you to access your camera remotely.

So choose a DNS service, choose a hostname, set the service to Host with your IP Address and then click the link that contains your IP address.The service will then send you a message containing a link which will allow you to complete the setup process as well as activate your hostname.

Step 3: Set Up Your Router

If you have successfully mastered step 2, you should have your hostname. Though your hostname now points toward your broadband connection, this does not necessarily mean that it will be accurate in the future.

This is especially the case if your dynamically-assigned address happens to change. So this means that you need to set your router so that it can keep the remote database updated with all of your changes.

So start by opening your router configuration pages. Type its address into the browser and navigate to the Details option. Every router configures differently, so make sure you check the main headings for Dynamic DNS or DDNS.

Enter all of the required details, your hostname and DNS login details, so that your router writes its ISP-assigned address to the subdomain’s whenever it changes.

Next, re-route incoming online traffic arriving to your IP camera. Check your router’s clients list or attached devices and make a note of all of the IP address. Then check your router menu and open a new port.

Choose HTTP as your service type and then enter your webcam’s address as the destination for all of your future incoming traffic. If it asks for a port number or range, use 80 for both the starting and ending. Save and then reboot the router.

Finally, close your configuration page and then open a new window on your browser. Point it towards your subdomain and you’ll see your IP camera’s login screen.

This will allow you to monitor all activity remotely. If possible, try to do this with a device that has not been attached to your local network, such as a phone that is 3G-enabled, so that you can be sure that the system actually works.

Conclusion

If you would like to ensure that your IP camera is set up properly, then you have to make sure that it is properly configured. The above steps are crucial. With a little patience, your camera will be ready to go in no time.

Leave a Reply

Your email address will not be published. Required fields are marked *

*